v2 Switch on firmware 10.2.0
Fat32 formatted a class 3 SanDisk extreme 128GB card using GUIformat, copied over SXOS_beta_v3.0.5 boot.dat
SX core very carefully installed, install photo below, never bridged caps or physically messed anything up. Resistance on each cap is about 160 ohms
SX indicator light is blue for 0-9 seconds (varies on every boot), then green
Booted to OS SX menu and updated chip to v1.3
Created Emunand on hidden SD partition, completed normally
Request offline license,...
v2 SX Core install, freezes / hangs on SX OS logo screen
Continue reading...
Fat32 formatted a class 3 SanDisk extreme 128GB card using GUIformat, copied over SXOS_beta_v3.0.5 boot.dat
SX core very carefully installed, install photo below, never bridged caps or physically messed anything up. Resistance on each cap is about 160 ohms
SX indicator light is blue for 0-9 seconds (varies on every boot), then green
Booted to OS SX menu and updated chip to v1.3
Created Emunand on hidden SD partition, completed normally
Request offline license,...
v2 SX Core install, freezes / hangs on SX OS logo screen
Continue reading...